- Carefully unscrew the damaged bulb - There are various reasons for damage. One reason can be brok

Kitchen Tiles Home Services Movers Kurt Clean Izvozva Landscaping Painting Cleaning Pazardzhik Doors Suspended Ceilings Refurbishment House manager Conditioners Alarms Insulation Solar collectors About Us Site Map
The average length of light bulbs is 1000 hours. In use of the luminaire closed lampshades temperature rises differently in different parts of the surface of the lamp. Created conditions affect the length of the light, making it decreased by an average of 10-30%. So one reason or another fixture repairs are inevitable.
While this may seem easy repair very difficult people. In incandescent bulbs damage is seen, this is not the case with frosted light bulbs. When replacing the bulb and repair the following steps:
- Carefully unscrew the damaged bulb - There are various reasons for damage. One reason can be broken balloon. In this case, the light bulb will grow hard. Use the support tool - pliers and remove all lighting tyalo.Ako have decided to remove the entire lamp is good to review the connections and wires. If there is a black, hardened and cracked insulation kabelchetata change. Lighting is more than sufficient conductor cross-section 1 mm square;
- Screw the new bulb carefully. After turning slowly, but nice effort tighten bulb. This will protect you from radiation bulb caused by a bad connection. If you do not turn up (and effort) bulb starts blinking and unwanted radiation, leading to its rapid breakdown;
Search for: Recent Posts Suspended ceilings - Advantages of Choosing interior doors Loader Equipment: Hitachi ZW95 choice of company insulation issues with the doors in the home services Tiles Kitchen Porters Kurt Clean Izvozva Landscaping Painting Cleaning orsam rts Pazardzhik Doors Suspended Ceilings Refurbishment House manager Conditioners Alarms Insulation Solar Collectors Archive July 2013 (1) June 2013 (1) January orsam rts 2013 (1) November 2012 (1) September 2012 (1) July 2012 (1) June 2012 (1) April 2012 (1) January 2012 (1) December 2011 (1) October 2011 (3) August 2011 (2) July 2011 (2) June 2011 (1) May 2011 (1) April 2011 (2) March 2011 (1) February 2011 (1) January 2011 (1) December 2010 (2) November 2010 (2) October 2010 (3) September 2010 (3) August 2010 (2) July 2010 (2) June 2010 (4) May 2010 (2) April 2010 (1) March 2010 (3) February 2010 (1) January 2010 (2) December 2009 (3) November 2009 (3) October 2009 (5) September 2009 (3) August 2009 (5) July 2009 (5) June 2009 (5) May 2009 (5) April 2009 (5)
2013 | All Rights Reserved